Menu
With tens of thousands of boards sold across the world, you can trust Aquaspa as the leader in quality and fun
The puncture-resistant material and construction ensures your hot tub never loses its shape and stability
Relax at the touch of a button with the 61*61*26 massage, 120 surrounding air jets, automatic preheating and integrated water filtrationMaterial of Spa: PVC
Inner: 1.14 X 1.14 X 0.65 m / 44 X 44 X 26 inches
Outer: 1.54 X 1.54 X 0.65 / 60 X 60 X 26 inches
Net Weight：26 kg / 57.2 lbs
Gross Weight: 28 kg / 61.7 lbs
Power: 110-120 V
Capacity: 600 L / 158 Gal The
Largest Bear: 210 kg / 462 lbsNETTED SANDWICH CLOTH COVER AND SAFETY KEYS
The cover maintains the water’s warm temperature, and keep the water clean from debris. Double safety lock clips and built-in air chamber to keep insulation and safe.120 BUBBLE JETS
The number of bubbles which 120 bublles will come up at the same time.Bubble keep working for 20 mins, then it will rest 10 mins. The bubble comes up from floor but it massages your lower and upper back, it not like jets but it feels good and relaxing. You can sit on the bottom without any discomfort.GROUND SHEET AND PREHEATING IN ADVANCE
Come with the ground and put your on a flat place which won’t hurt your spa in outdoor or indoor. Automatically adjust SPA temperature 12-24 hours in advance. Heat up 2℃ / HOUR. Do not drag it when unpacking and packing to prevent the surface from being punctured and damaged by sharp objects.AUTOMATIC DIGITAL CONTROL PANEL
Water temperature heats range from min 68℉ to max 104℉(20℃-40℃). Environment temperature is over 25℃, it can be heated to a max of 104℉(40℃). Set spa’s temperature 12-24 hours in advance. Do not use it under 32℉SPA POOL WATER FITER CARTRIDGE
SPA can be operated independently for filtering power; The heating function will be accompanied by filtration, so SPA must be used with 2 filter; Please replace the filter in time after 168H use. When the filter loses its filtering function, the control panel will automatically alarm and display FC; The filter element can be washed with clean water after useEASY TO INFLATE AND DEFLATE
Less than 5 minutes to inflate. No more than 20 minutes to deflate. WATER MUST BE LOCATED BETWEEN MAX AND MIN WATERLINES. IF LOWER THAN THE MIN LINE, THEN IT CAN’T HEAT.120 SURROUNDING BUBBLE JETS
The Bubble function will be FORCED TO STOP WORKING AFTER 20 MIN AND REST FOR 10 MIN. DURING THIS PERIOD, EVEN IF THE BUBBLE BUTTON IS PRESS AGAIN, THE BUBBLE FUNCTION WILL NOT BE TURNED ON.Do not consider this to be a broken Bubble function, but a normal phenomenon. After the bubble stops working for 10 minutes, press the bubble button again, and the bubble function will start again
