Crose

Search by Category

User
cart
Home / Guidelines for an Indoor Hot Tub Installation

Guidelines for an Indoor Hot Tub Installation

Guidelines for an Indoor Hot Tub Installation

If you want to set up a hot tub, indoors might be the best option. There are many advantages of installing an indoor spa such as protection from harmful elements, enhanced privacy, and it will also give you the ability to use your hot tub anytime you want. However, it is preferable to install a hot tub indoor with the help of a qualified contractor, but it is also advisable to be involved and cooperative during the building process.

In order for you to make the right decisions, you must be knowledgeable about the task. So to help you out, here are some guidelines that could help in having the most satisfying end product.

Choosing a hot tub and its location

tub_installationThe first thing to consider is the type of hot tub that you will purchase. There are basically two types of hot tubs to choose from and, they are portable spas and permanently fixated tubs. Whatever decisions you may have in mind, you must always know the electrical requirements and configurations of the spa that you will purchase. If you’re still looking for a spa, a site worth mentioning for shoppers is hot tubs depot.

The second step is to select a room where you will install the spa. The bathroom would be the most suitable place to install the hot tub because of its resistance to water and moisture. However, it is not always an option for the spa might be too big for the bathroom, or you just want to separate it. So if you’re going to build a new room for the spa, only use materials that can resist moisture and dampness. In addition, choose flooring that doesn’t get slippery with water, and ensure that the room is properly ventilated.

Ensuring that the room you have chosen is fully capable of accommodating the weight of a watered spa and its users is the job of the contractor that you hired. If the room is not structurally sound, the contractor would need to enhance its foundation. You will need to get building permits from the local government to continue this project. Another preparation the contractor would need to make is to make sure that the floor where the hot tub will be placed is properly levelled, while having a place where the water will flow going to the drainage.

Making assessments on the plumbing and power supply

We all know that the spa fully operates using water and electricity. These two elements need to be properly planned to avoid any unnecessary accidents or property damages to occur. Dealing with electricity is highly dangerous so it is best to leave it to the hands of a professional contractor. Take not of where the electrician will install the GFCI switch, as it needs to be far, protected and accessible at the same time. The plumbing lines and drainage also needs to be double checked if it is properly connected and sealed to avoid leaks.

The architecture of the room

making_assessmentsIf you want to have the most out of your newly purchased spa, then visual enhancements can do the trick. With a creative mind and the skills of your contractor, you can create a luxurious haven of relaxation inside your home. Get designing ideas on the internet or magazines, and consult your contractor if it is possible to do it with your current budget. A qualified contractor should be able to provide suggestions for materials that are most suitable for the design you have chosen. They can even give cheaper yet better alternatives for highly expensive materials, which can help you save money.

Copyright © 2018. Hot Tubs Depot. All rights reserved.